Home Member Sitemap  
Windows Based Universal Programmable Controls
Web Enabled, Windows Based HMI
Ethernet-Based I/O
Leader-5000 Series
Leader-5100 Series
Thermo Controls
Ethernet-Based Programmable Computer

Hurco Automation Home > Products >
Ethernet-Based I/O > Leader-5100 Series > Leader-5117

Leader-5100 Series

View Larger Image

  Ordering Information  

Leader-5117  Dual Ethernet 8-CH Isolated Analog Input Module
CPU RISC-Based, 100MHz
SDRAM 32K bytes
Flash 512K bytes
EEPROM 256 bytes
Watch dog timer 1.0 sec H/W
Network protocol Modbus/TCP, TCP/IP, UDP, SNMP, HTTP, TFTP, BOOTP, DHCP

IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX

Bus connection RJ-45 modular jack, Auto MDI/MDI-X
Protection 1.5 KV magnetic isolation protection
Serial interface RS-232, 2m JTAG PIN
Power input connector 24VDC, 3-pin, 5mm pitch
LED indication

Power/Run                      LED: Red
LAN link/speed                LED: Green/Red
LAN Activity                     Orange ON/Blinking
LAN Speed 100M/10M     Green ON/OFF

Mechanical ABS with standard DIN-rail mounting
I/O wiring connector 16-pin screw terminal, 5mm pitch
Dimensions(WxHxD) 40 x 108 x 73.48mm
Analog Input
Channels 8, differential
Resolution 16-bit
Input range

Supports different input ranges for different input channels

Voltage: ±10V, ±5V, ±1V, ±500mV, ±150mV
Current: ±20mA (Jumper setting enabled 125Ω resistor)

Accuracy ±0.05% of FSR ±1LSB
Sampling rate 10 samples/sec (total)
Input impedance 10 MΩ
Calibration On board EEPROM
Isolation voltage 2500Vrms
Power Requirements
Power input 24VDC nominal, 18 to 32VDC
Power consumption 125mA @ 24VDC max.
General Environment
Operating temperature 0 ~ 50°C
Storage temperature -20 ~ 70°C
Humidity(Operating) 20 ~ 90% non-condensing
Network server HTTP, SNMP
SDK provided C/C++, C#, VB, BCB
Utility Block I/O Utility
OPC server driver YES

*All specification and photos are subject to change without notice.

Copyright©2007, Hurco Automation Ltd. All Rights Reserved. | info@pcbased.com  

website design / webhosting by fansio