Leader-5124 Dual Ethernet 4-CH Isolated Analog Output Module |
CPU |
RISC-Based, 100MHz |
SDRAM |
32K bytes |
Flash |
512K bytes |
EEPROM |
256 bytes |
Watch dog timer |
1.0 sec H/W |
Network protocol |
Modbue/TCP, TCP/IP, UDP, SNMP, HTTP, TFTP, BOOTP, DHCP |
Ethernet |
IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX |
Bus connection |
RJ-45 modular jack, Auto MDI/MDI-X |
Protection |
1.5 KV magnetic isolation protection |
Serial interface |
RS-22, 2m JTAG PIN |
Power input connector |
24VDC, 3-pin, 5mm pitch |
LED indication |
Power/Run LED: Red LAN link/speed LED: Green/Red LAN Activity Orange ON/Blinking LAN Speed 100M/10M Green ON/OFF |
Mechanical |
ABS with standard DIN-rail mounting |
I/O wiring connector |
16-pin screw terminal, 5mm pitch |
Dimensions(WxHxD) |
40 x 108 x 73.48mm |
Analog Output |
Channels |
4(voltage or current), differential |
Resolution |
12-bit |
Output range |
0-20mA (sink), 0-10V, ±10V |
Output impedance |
0.5Ω |
Current load resistor |
0 to 500Ω (source) |
Programmable output slope to safety value |
0.125 to 1128 mA/sec (current) 0.0625 to 64 V/sec (voltage) |
Accuracy |
±0.1% of FSR ±1LSB |
Calibration |
On board EEPROM |
Isolation voltage |
2500Vrms |
Power Requirements |
Power input |
24VDC nominal, 18 to 32VDC |
Power consumption |
132mA @ 24VDC max. |
General Environment |
Operating temperature |
0 ~ 50°C |
Storage temperature |
-20 ~ 70°C |
Humidity(Operating) |
20 ~ 90% non-condensing |
SOFTWARE |
Network server |
HTTP, SNMP |
SDK provided |
C/C++, C#, VB, BCB |
Utility |
Block I/O Utility |
OPC server driver |
YES | |
*All specification and photos are subject to change without notice. |